The NVIDIA GeForce RTX 5060 Ti is the fifth graphics card joining the RTX 5000 range, with this GPU being targeted as more of a mid-range option compared to the previous releases. However, for those building a brand new gaming PC, one of the big questions we often face in the wake of a GPU launch is whether a new series of cards will likely pose any problems regarding case clearance. That’s why we’ve tested a fantastic range of PC cases to determine which chassis is the best to house the RTX 5060 Ti.
In this series of buyer’s guides, we’ve compiled a range of articles that look at the best CPUs, power supplies and PC cases to pair up with the RTX 5060 Ti. In this article, we’re delving into the best cases, where we’ve analysed the specs, features and pricing to provide an overview of each selection.
Our Top Pick: Montech XR
The best PC case for the RTX 5060 Ti is the Montech XR. This is a chassis that we’ve used in the past for builds with more of a budgeting focus. The XR is an affordable chassis that comes with three pre-installed fans, dual tempered glass panels providing a window into your build, and a heavily ventilated design built to maximise airflow. This is a great chassis geared towards those sticking to a tight budget.
Best PC Cases for the RTX 5060 Ti
1. Montech XR
The Montech XR is our top pick for this roundup and a favourite on the GeekaWhat YouTube channel. It is targeted as a budget chassis, offering a fairly simplistic aesthetic but tremendous functionality. Upon unboxing the case, you’re greeted with a dual-tempered glass design, providing an unhindered window into your build so you can see all the components inside.
It comes with three pre-installed fans: two on the side that use reverse blades to pull air in and one on the rear that exhausts the hot air. If you are tied to a tight budget, you won’t need to buy any extra fans, as the three provided will be more than ample for most gamers. The XR features a heavily vented PSU chamber, allowing hot air from your power supply to easily escape.
| Key Specs | Montech XR |
|---|---|
| Form Factor | Mid-Tower |
| Motherboard Support | Mini-ITX, Micro-ATX, ATX |
| Case Dimensions (L x W x H) | 450mm x 230mm x 455mm |
| Front IO | 2 x USB 3.0 Type-A 1 x USB Type-C 1 x 3.5mm Microphone Jack 1 x 3.5mm Headphone Jack |
| PCI-E Slots | 7 |
| Max Clearance | 175mm Cooler Height 420mm GPU Length 230mm PSU Length |
| Drive Support | Up to 2 x 2.5 inch Up to 2 x 3.5 inch |
| Fan Support | Top: 3 x 120mm Side: 2 x 120mm Bottom: 3 x 120mm Rear: 1 x 120mm |
| Radiator Support | Top: Up to 360mm Rear: Up to 140mm |
| Pre-installed Fans | 3 |
In terms of features, the Montech XR offers a neat and simple cable management system designed to keep all cables clean if managed correctly. There’s ample room for large graphics cards, with this case supporting GPUs up to a max length of 420mm and CPU coolers up to 175mm tall. Each pre-installed fan also uses addressable RGB, which allows you to customise the lighting colours and effects through various applications.
The main issue with this case is the clearance between the side fans with larger graphics cards. While big cards can be installed, the clearance between the fans and the GPU is pretty nonexistent, which means cards are likely to become deseated if this case is moved round a fair amount. We recommend keeping this case stationary or using a small 2-fan card to provide plenty of clearance between the GPU and the fans.
Pros
- 3 pre-installed fans
- Great cable management system
- Fans use addressable RGB
Cons
- Width clearance of large cards
- Fairly simplistic look
2. Corsair FRAME 4000D
The second PC case in this roundup is the FRAME 4000D from Corsair. We’ve looked at this chassis before in a previous dedicated review. This is a modern version of the original 4000D, which hit the shelves some time ago. The FRAME 4000D builds upon all of the great qualities and features of the original design, making it much easier to build with, on top of being a great-looking case.
Regarding the design, the FRAME 4000D RS ARGB can be purchased in black or white. Both iterations are sophisticated and offer a metal mesh aesthetic that looks great and ensures plenty of airflow. This case has three 120mm ARGB fans mounted at the front of the chassis. This panel features Corsair’s InfiniRail mounting system, increasing the length of the mounting brackets for larger fans (up to 200mm at the maximum).
| Key Specs | Corsair FRAME 4000D RS ARGB |
|---|---|
| Form Factor | Mid-Tower |
| Motherboard Support | Mini-ITX, Micro-ATX, ATX, E-ATX |
| Case Dimensions (L x W x H) | 490mm x 239mm x 486mm |
| Front IO | 2 x USB 3.2 Gen1 Type-A 1 x USB 3.2 Gen2 Type-C 1 x 3.5mm Combo Jack |
| PCI-E Slots | 7 (3 Vertical) |
| Max Clearance | 170mm Cooler Height 430mm GPU Length 220mm PSU Length |
| Drive Support | Up to 2 x 2.5 inch Up to 2 x 3.5 inch |
| Fan Support | Top: 3 x 120mm Front: 3 x 120mm Side: 3 x 120mm Bottom: 2 x 120mm Rear: 1 x 140mm |
| Radiator Support | Top: Up to 360mm Front: Up to 360mm Side: Up to 360mm Rear: Up to 140mm |
| Pre-installed Fans | 3 |
There’s 430mm of clearance for large graphics cards, which is plenty of room for some of the larger RTX 5060 Ti models on the market. There’s room for up to three 360mm liquid coolers on the front, top, and side panels, allowing you to fill this case with plenty of cooling support. Corsair also features a rotational GPU design at the rear of the case, enabling builders to pop the back out, flip it over and utilise a PCI-E riser to spice up the look of your build and show off your graphics card.
Cable management can be a bit of a challenge with this chassis. There isn’t much clearance at the back of the chassis, so you’ll need to carefully tighten down any wires and PSU cables to minimise bulge. This is also made slightly more complex because there aren’t many points to anchor cables.
Pros
- InfiniRail mounting system
- Uses addressable RGB
- Accommodates modern components
Cons
- Tough cable management
- Only has 3 pre-installed fans
3. Antec C5
The last PC case in this buyer’s guide roundup is the Antec C5. We’ve recommended this chassis a few times before due to its sleek design and seven pre-installed fans. This dual-chamber case is available in black and white, so builders who are looking for a dark—or lighter-themed PC have options.
The front panel offers a small strip of RGB, which can be synced with the rest of the fans and any additional components in the case. It’s also worth highlighting the integrated fan and RGB hub, which allows you to free up motherboard headers. You can also control all of the lighting through the case button at the top, minimising the hassle of having to tinker with RGB software.
| Key Specs | Antec C5 ARGB |
|---|---|
| Form Factor | Mid-Tower |
| Motherboard Support | Mini-ITX, Micro-ATX, ATX |
| Case Dimensions (L x W x H) | 469mm x 285mm x 400mm |
| Front IO | 2 x USB 3.0 Type-A 1 x USB 3.2 Gen2 Type-C 1 x 3.5mm Headphone Jack 1 x 3.5mm Microphone Jack |
| PCI-E Slots | 7 |
| Max Clearance | 160mm Cooler Height 410mm GPU Length 240mm PSU Length |
| Drive Support | Up to 2 x 2.5 inch Up to 1 x 3.5 inch |
| Fan Support | Top: 3 x 120mm Side: 3 x 120mm Bottom: 3 x 120mm Rear: 1 x 120mm |
| Radiator Support | Top: Up to 360mm Side: Up to 280mm Bottom: Up to 360mm Rear: Up to 120mm |
| Pre-installed Fans | 7 |
At the rear of the case, there’s plenty of space to cram in cables and a range of points to anchor the wires with Velcro or cable ties. Additionally, there are plenty of cutouts to route cables through and keep everything clean and tidy.
The main weakness of the Antec C5 is that its design doesn’t quite account for cable extensions. There’s no way to route a GPU extension underneath the motherboard tray, and the other extensions around the case look a bit messy and are much harder to tidy up with cable ties. If you want to build an incredibly tidy PC, we recommend looking at some alternatives that better account for cable extensions.
Pros
- Inlcuded fan and RGB hub
- 7 pre-installed fans
- Gorgeous design
Cons
- Doesn't account for cable extensions
- Difficult GPU cable routing
Frequently Asked Questions
Is it Important to Cable Manage Your PC?
It can be. We recommend cable managing enough to ensure that wires don’t block or hinder airflow, but managing cables is more of a preferential task.
How Much Clearance Do You Need for the RTX 5060 Ti?
According to NVIDIA, the RTX 5060 Ti comes in at <>mm long, but there are AIB cards that will be larger, so make sure to double-check the size of your card against the case manufacturer’s specs page.
Do I Need to Buy Extra Fans?
All the cases we’ve looked at in this roundup come with extra fans, but it may be worth adding an additional fan to the FRAME 4000D to ensure hot air can be exhausted.
